Clipsal 56E2-GY IP66 56 Series Mounting Enclosure 2 Gang Grey (198 x 102 x 63mm)

Description

More room, same IP66 protection.

The Clipsal 56E2-GY Mounting Enclosure steps up to 2 Gang capacity, giving you a sealed, IP66-rated base for larger 56 Series component setups. It handles washdown areas, exposed outdoor runs and dusty job sites while keeping moisture and dust away from your wiring, so you can fit more into one enclosure without doubling up.

• IP66 rated to AS 60529 - dust-tight and protected against powerful water jets
• 2 Gang enclosure, 198 x 102 x 63mm (W x H x D)
• Grey PVC housing built to AS 3100
• Surface, wall-mounted design with 8 mounting holes
• 3 cable entry points (2 x M25, 1 x M32)
• Compatible with the full range of 56 Series covers

Get your 56E2-GY today and give your 56 Series setup the extra room it needs.

Why it Matters

Built for Australian Conditions
Dust, moisture and big temperature swings are part of the job on Australian sites. The 56E2-GY holds an IP66 rating and a -25°C to 75°C operating range, so it performs on coastal sites, rural properties, workshops and busy trade vans alike, and it's built to AS 3100 for Australian compliance.

More Room for Bigger Jobs
At 198 x 102 x 63mm, the 2 Gang enclosure gives you double the mounting width of the 1 Gang version, so you can house more components, run more cabling, or simply give yourself extra room to work without needing a second enclosure. Three cable entries (2 x M25, 1 x M32) and eight mounting holes keep installation straightforward.

Durable Housing, Backed by Warranty
The grey PVC housing is built to handle the daily knocks of a working site, and it's backed by an 18-month manufacturer warranty for extra peace of mind on every install. It's also compatible with the full 56 Series covers range, so it slots directly into your existing 56 Series setup.

Also Available
Beyond the standard grey finish, the 56E2 enclosure is also offered in Chemical Resistant Grey, Chemical Resistant Orange, Chemical Resistant White and Woolworths Grey for sites with specific colour-coding or chemical exposure requirements.

Is the Clipsal 56E2-GY mounting enclosure weatherproof?
Yes, it carries an IP66 rating to AS 60529, meaning it's dust-tight and protected against powerful water jets from any direction.

What size is the Clipsal 56 Series 2 Gang mounting enclosure?
It measures 198 x 102 x 63mm and weighs 0.52kg, with a grey PVC housing.

What's the difference between the 1 Gang and 2 Gang 56 Series enclosures?
The 2 Gang 56E2-GY is 198mm high compared to 102mm for the 1 Gang 56E1-GY, giving roughly double the internal mounting width for larger component setups, while both share the same 102 x 63mm width and depth, IP66 rating and 56 Series covers compatibility.