Clipsal 56L1-GY 56 Series IP66 Enclosure Lid 1 Gang Grey with Gasket

Description

Seal your 56 Series enclosure to full IP66.

The Clipsal 56L1-GY is a 1-gang plastic lid with an integrated gasket, built to close off a 56 Series enclosure and lock out dust and water where the enclosure would otherwise sit open. It's the simple, purpose-made way to weatherproof an unused gang on an industrial installation.

Key Features

• Single-gang (1 gang) enclosure lid for the Clipsal 56 Series
• Supplied with gasket for a sealed, weatherproof closure
• IP66 degree of protection conforming to AS 60529
• Chemical-resistant grey ABS construction
• Surface / wall-mounted, matched to 56 Series covers
• Dimensions: 95 mm x 95 mm x 28 mm
• Built to AS 3100

Order now to weatherproof your 56 Series enclosure.

Why it Matters

Full IP66 needs the right lid
An IP66 rating on a 56 Series enclosure only holds if every gang is sealed. The 56L1-GY caps a single gang with its own gasket, keeping the dust- and water-tight rating intact across the whole enclosure rather than leaving a weak point.

Australian industrial standard
Manufactured to AS 3100 with IP66 protection to AS 60529, the 56L1-GY suits the harsh outdoor and industrial conditions the 56 Series is specified for across Australian sites.

Chemical-resistant grey
The chemical-resistant grey ABS body is made to stand up to the same environments as the rest of the 56 Series range, so a capped gang weathers the same as the sockets and switches beside it.

Does the 56L1-GY come with a gasket?
Yes. The gasket is included, giving you a sealed IP66 closure straight out of the pack with no extra parts to source.

What size is the Clipsal 56L1-GY lid?
It measures 95 mm wide by 95 mm high with a depth of 28 mm, matched to a single 56 Series gang.

What IP rating does the 56L1-GY have?
It provides IP66 protection conforming to AS 60529, making it suitable for dust-tight and powerful-water-jet environments when correctly installed.