GEN3 UKT5100A4P Surface Mount Changeover Switch 100A 4 Pole

Description

Heavy-duty source switching, enclosure included.

The GEN3 UKT5100A4P is a 100 Amp 4 pole changeover switch supplied in its own surface-mount enclosure. It selects between two supplies and switches all four conductors at once, making it suited to high-current mains and generator or inverter changeover.

Key Features

• 100 Amp rated current
• 4 pole switching
• Changeover (transfer) action
• Supplied with surface-mount enclosure
• Switches all four conductors together
• Manual operation

Available now — buy online for fast dispatch.

Enclosure included, ready to mount

Unlike a bare switch that needs a separate housing, the UKT5100A4P comes in its own surface-mount enclosure. That means it can be fixed to a wall or panel and wired in as a self-contained unit, saving the time and cost of sourcing and fitting a separate box. It is a practical choice where a fixed, standalone changeover point is needed.

Four-pole switching at 100A

With four poles, the switch transfers four conductors in a single action, typically the three phases plus neutral of a three-phase supply. Switching the neutral along with the phases gives a full break of the source on changeover. At 100 Amps it is rated for substantial loads, suiting main-switch and whole-installation transfer duties rather than a single circuit.

Built for source selection

A changeover switch lets an installation run from one of two supplies, the standard arrangement for backing up mains with a generator or inverter. The switch ensures the selected source is connected while the other is isolated. Final configuration and suitability for your installation must be confirmed by a licensed electrician.

Q: Does the UKT5100A4P come with an enclosure?
A: Yes. It is supplied in its own surface-mount enclosure, so it can be wall or panel mounted and wired in as a self-contained unit.

Q: What does 4 pole switching cover?
A: Four poles switch four conductors together, typically the three phases plus neutral of a three-phase supply, giving a full break of the source on changeover.

Q: Can the UKT5100A4P be used for mains-to-generator changeover?
A: Yes. A changeover switch selects between two supplies such as mains and a generator. Final suitability and wiring must be confirmed by a licensed electrician for your installation.