GEN3 MIS1-35 35A Single Pole 250V Mini Isolator Switch IP66

Description

Compact weatherproof isolation, lockable for safety.

The GEN3 MIS1-35 is a 35-amp single-pole mini isolator switch, rated IP66 for outdoor and wash-down use. It provides a secure, lockable means of isolating a single-phase circuit for maintenance or emergency shutdown, in a compact surface-mount enclosure with top and bottom cable entries. The higher 35A rating suits larger single-phase equipment such as air conditioners, pumps, motors and machinery that needs a local isolation point.

Key Features

• 35A rated current, single pole, 250V single-phase
• IP66 weatherproof – dust-tight and protected against high-pressure water jets
• Padlockable in the off position for safe isolation (6mm shackle)
• Top and bottom cable entries for flexible installation
• Compact surface-mount body (approximately 141 × 84 × 90mm)
• Durable PCA18 virgin-grade plastic (no regrind)
• 316 stainless steel springs and mounting screws
• Brass internal components, greater than 85% copper for lower heat rise
• Mounting template provided
• Operating range −25°C to +70°C
• Australian/NZ approval or compliance certificates held
• Interchangeable with other major brands

Buy now for fast dispatch across Australia.

Why a Lockable Isolator Matters

An isolator gives a clear, local point to switch off and lock out a circuit before working on connected equipment, a core requirement of safe isolation practice. The MIS1-35 padlocks in the off position with a 6mm shackle, so the circuit cannot be re-energised while someone is working downstream. Top and bottom cable entries make it easy to wire in line, whether surface-run conduit or cable. The 35A rating gives extra headroom over the 20A model for larger single-phase loads.

Built for the Outdoors

Rated IP66, the MIS1-35 is dust-tight and withstands high-pressure water jets, so it stands up to rain, dust and wash-down. Moulded from PCA18 virgin-grade plastic with 316 stainless steel springs and screws and high-copper brass internals, it is built for a long service life in exposed locations, and operates reliably from −25°C to +70°C.

Q: What is the GEN3 MIS1-35 used for?
A: It is a 35A single-pole isolator for safely switching off and locking out a single-phase circuit, suited to larger air conditioners, pumps, motors and machinery needing a local isolation point.

Q: What is the difference between the MIS1-35 and the MIS1-20?
A: Current rating. The MIS1-35 is rated 35A and the MIS1-20 is rated 20A. Both are IP66 single-pole mini isolators in the same compact enclosure.

Q: Can the isolator be locked off?
A: Yes. It padlocks in the off position with a 6mm shackle, preventing the circuit from being re-energised during maintenance.