Industrial Power Boards Adapters
- Electrotraders Power Boards are made using all Australian approved quality Components
- This Board supplies 6 x 15 Amp Single Phase 240 Volt Outlets from a 2 Metre 3 Pin 15 Amp Single Phase supply.
- 2 metre lead HO7 Rubber Cable
- Circuit Protected by A Single Pole GEN3 16 Amp RCBO 6ka
- Mounted inside 3 Module Base
- Dimensions of Base Unit 392 x 200 x 110mm
- All GEN3 Industrial Switch Gear is IP66 Rated
- All GEN3 plastics are PCA18 virgin grade (No regrind)
- All GEN3 products use 316 Stainless Steel Springs and Mounting Screws.
- All Brass internal components are greater than 85% copper.
- All GEN3 products have Australian/NZ Approval Certificates.
- All GEN3 products are interchangeable with other major brands.
- GEN3 Operating Temperature range -25 °C to +70°C
- The lead is made of HO7 Grade Rubber Flex which is sheathed in a Black Insulation that is Chemical/Oil Resistant and Flame Retardant
- Conductors - Class 5 tinned copper according to AS/NZS 1125,IEC 60228
- Insulation - Ethylene-propolene rubber (EPR) R-RP-90 90°C Conductor
- Inner Sheath - EPDM Rubber Outer Jacket - Chlorinated Polyethylene, CPE rubber compound.
- UV, Sunlight and weather resistant. Flame retardant to IEC 60332-1-2:2004,EN60332-1-2-2004.
- Operating Temperature range -25°C to +90°C (mobile) -40°C to +90°C (fixed)
- IP66 Rated Plug Socket and Base
- Be the first to review this product
WRITE YOUR REVIEW
Write Your Own Review
You may also be interested in the following product(s)
15A Power Extension Lead Single Phase 15m Metres with 3 Pin 15 AMP Plug Socket
15A Extension Lead Single Phase 15m Metres 3 Pin 15 AMP Plug Socket Heavy Duty
Power Extension Lead Cord 20M Heavy Duty 1.5mm Cable with 10 Amp Plug & Socket
Power Extension Lead Cord 15 AMP 20M Heavy Duty with 15 Amp Plug & Socket