Extension Lead 5 Pin 40 Amp Round Pin Angled Plug 2m Standard Duty 6mm cable 415V

Description

Heavy duty three phase power for demanding equipment.

A 5 pin round 40 Amp extension lead carries 415V three phase power to high current equipment through three active phases plus neutral and earth. Choose lengths from 2m to 60m; each lead is built to order, then tested and tagged by licensed electricians.

High quality extension lead:

• Extension Lead 5 Pin Round 40 Amp 415V
• 24 month warranty on all products. Warranty does not extend to misuse.
• Please consult with a qualified electrician or engineer about the suitability of this product for your intended purpose.
• All Electrotraders Extension Leads are assembled, tested and tagged in-house by our Licenced Electricians.

Choose your configuration:

• Available in lengths (m): 2, 3, 5, 10, 15, 20, 25, 30, 40, 50, 60 (Note: configurations may not offer all length options due to component availability or electrical characteristics)
• Cable Specifications: cross-sectional area (CSA in mm2), Nominal Sheath Thickness (NST in mm), Max DC Resistance @20°C (MaxR in ohms/KM), Nominal Diameter (NOD in mm), Amperage rating (in accordance with AS/NZS 3008.1.1.2009 Table 14)
  • Standard: CSA 6mm2, NST 2.5mm, MaxR 3.39, NOD 18.5mm, Amps 46
  • Heavy Duty: CSA 10mm2, NST 3.6mm, MaxR 1.95, NOD 22.3mm, Amps 66
  • Extra Heavy Duty: Not Available
• Typically used at events & temporary cabling, fairgrounds, sporting venues, for generators / motors / compressors / construction applications including portable equipment such as concrete cutting.

IMPORTANT: Avoid extra costs and fees of ordering the wrong product. Before you order: confirm the compatibility of the plug and sockets i.e. 5 Pin 32A, 5 Pin 20A, 5 Pin 10A etc. If you aren't sure, contact us, we are happy to help.

Switch Gear:

• All Plugs and Sockets are source from high quality reputable Australian brands, are IP66 rated and are compatible with all leading Australian switch gear.
• Choose from our regular high quality GEN3 plugs and sockets, or upgrade to industry leading Clipsal gear (available on some product options only)

Cable Properties:

• Leads are assembled using Multi Core Rubber Insulated and Sheathed Flexible Power Cable insulated with Ethylene-propylene rubber (EPR) R-EP-90 90 deg C Conductor
• Conductors are Class 5 tinned copper according to AS/NZS 1125,IEC 60228
• H07 Grade Rubber Flex cable has a submersible rating of 200m (suitable for fresh water, salt water, sewage/contaminated water), is UV sunlight / oil / weather resistant and flame retardant to IEC 0332-1-2:2004,EN60332-1-2-2004.
• Outer jacket (black colour) made of Chlorinated Polyethylene, CPE rubber compound
• Rated Voltage 0.6/1kV

Buy online today for fast dispatch Australia-wide.

Made for harsh Australian sites. From generators, motors and compressors to concrete cutting equipment on construction jobs, this lead runs on H07 grade rubber flex that resists UV, oil and weather, stays flame retardant and holds a 200m submersible rating. It is equally at home supplying temporary power across events, fairgrounds and sporting venues, with IP66 rated plugs and sockets keeping dust and water jets out of the connection.

Standard or Heavy Duty? Standard 6mm² cable carries 46 Amps under AS/NZS 3008.1.1.2009 Table 14, above the 40 Amp rating of this lead, and handles most jobs. Heavy Duty 10mm² cable nearly halves the maximum DC resistance, from 3.39 to 1.95 ohms/KM. Because voltage drop grows with current, that difference matters at full 40 Amp load, so Heavy Duty is the smarter pick for 40m to 60m runs or voltage sensitive machinery.

Test tagged in Brisbane, shipped Australia-wide. Licensed Australian electricians build each lead at our Rochedale QLD warehouse, then test and tag it before dispatch, backed by a 24 month warranty. Click and collect locally, or have it shipped anywhere in Australia. For custom lengths or bulk order quotes, call 1300 017 197.

Q: What is a 5 pin 40 amp extension lead used for?
A: It supplies 415V three phase power to high current equipment fitted with a 5 pin round 40A plug, including generators, motors, compressors and construction machinery such as concrete cutting gear, wherever temporary cabling is needed at events, fairgrounds, sporting venues and work sites.

Q: Should I choose Standard or Heavy Duty cable?
A: Standard 6mm² cable is rated to 46 Amps and covers most 40 Amp applications. Heavy Duty 10mm² cable lowers resistance from 3.39 to 1.95 ohms/KM, which cuts voltage drop on long runs of 40m to 60m.

Q: Can I get this extension lead with Clipsal plugs and sockets?
A: Yes. Choose Clipsal under the Switch Gear option on available configurations; our standard fitting is GEN3. Both options are IP66 rated and suit leading Australian switch gear.