4 Pin 20 Amp 3 Phase Electrical Appliance Lead 10m Long

SKU: applea42010-k

$124.00

4 Pin 20 Amp 3 Phase Electrical Appliance Lead 10m Long

Buy In Bulk & Save!
Buy 4 to 9: Pay $118.00
Buy 10 or more: Pay $112.00


THIS ITEM IS NOT AN EXTENTION LEAD. MUST BE INSTALLED BY A LICENCED ELECTRICIAN.

APPLIANCE LEADS ARE DESIGNED TO BE CONNECTED DIRECTLY TO EQUIPMENT TO BE PLUGGED INTO AN OUTLET.

  • 4 Pin 20 Amp 3 Phase Electrical Appliance Lead 10m Long
  • Appliance Lead for replacement of damaged leads on portable equipment.
  • Cable Specifications - CSA 2.5mm2
  • Nominal Cable Diameter 12.3mm
  • Typically used at events & temporary cabling, fairgrounds, sporting venues, portable equipment including concrete cutting and grinding machines, construction site leads, wet or oily environments, mine sites and quarries, submersible pumps, to name just a few applications.
  • Made of H07 Grade Rubber Flex which is sheathed in a Black Insulation that is Chemical/Oil Resistant and Flame Retardant
  • Conductors - Class 5 tinned copper according to AS/NZS 1125,IEC 60228
  • Insulation - Ethylene-propolene rubber (EPR) R-RP-90 90??C Conductor
  • Inner Sheath - EPDM Rubber Outer Jacket - Chlorinated Polyethylene, CPE rubber compound.
  • Rated Voltage - 0.6/1kV
  • The cable is UV Sunlight and weather resistant. Flame retardant to IEC 0332-1-2:2004,EN60332-1-2-2004.
  • All Plugs and Sockets are IP66 Rated and are compatible with all leading Australian switch gear.
  • All Plugs and Sockets are Reputable Australian Brands (No Second Rate Rubbish)
  • 24 Months Warranty on all product. Warranty does not extend to misuse.
  • All Electrotraders Appliance Leads are assembled In-House by our Licenced Electricians.
  • A 45 Degree Angle Plug can be fitted instead as a special order with an additional cost. Please indicate if you require such a plug when ordering.
  • Cable Length - 10m

(applea42010-k)

SKU applea42010-k
Colour Black
Brand Electrotraders